Nexus di GNS3

Setelah beberapa saat googling di Internet, dan menemukan beberapa link [1], [2] terkait “how to run NXOS Titanium di GNS3”, akhirnya bisa saya coba. Berikut setingan awalnya:

1. Buat satu New VM di Virtualbox, lalu seting parameter berikut:

nx-os new

2.  Seting memorynya 2GB. Lalu Nex dan pilih opsi “Use an existing virtual hard drive file” Lalu browse file VMDK yang kita miliki dan klik tombol Create.

nxos-storage

3. Setup parameter GNS3 untuk virtual box guest, seperti berikut:

identifier: nx-os2

vm List: nx-os2 (klik tombol “refreshvmlist” jika belum muncul nx-os2)

ceklis reserve first NIC dan enable console.

Lalu Save dan klik OK

gns3-vb

4. Buatlah satu project baru dan tambahkan satu Virtualbox (nexus) dan satu router 3700 (misalnya) lalu koneksikan.

gns topology

nx7000# sh version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Software
  loader:    version N/A
  kickstart: version 6.2(1)
  system:    version 6.2(1)
  kickstart image file is: bootflash:///titanium-d1-kickstart.6.2.1.bin
  kickstart compile time:  12/25/2020 12:00:00 [04/10/2013 13:40:25]
  system image file is:    bootflash:///titanium-d1.6.2.1.bin
  system compile time:     2/21/2013 10:00:00 [04/10/2013 18:19:27]

Hardware
  cisco Nexus 7000 Unknown Chassis (“Unknown Module”)
  Intel(R) Core(TM) i5-2450M C with 2064088 kB of memory.
  Processor Board ID T0027995CE2

  Device name: nx7000
  bootflash:    2097152 kB
Kernel uptime is 0 day(s), 0 hour(s), 14 minute(s), 29 second(s)

plugin
  Core Plugin, Ethernet Plugin
nx7000#

nx7000# show cdp neighbors
Capability Codes: R – Router, T – Trans-Bridge, B – Source-Route-Bridge
                  S – Switch, H – Host, I – IGMP, r – Repeater,
                  V – VoIP-Phone, D – Remotely-Managed-Device,
                  s – Supports-STP-Dispute

Device-ID          Local Intrfce  Hldtme Capability  Platform      Port ID
R1                  Eth2/1         169    R S       3745          Fas0/0
nx7000#

nx7000# show interface brief

——————————————————————————–
Port   VRF          Status IP Address                              Speed    MTU
——————————————————————————–
mgmt0  —           up     192.168.11.101                          1000     1500

——————————————————————————–
Ethernet      VLAN    Type Mode   Status  Reason                   Speed     Por
t
Interface                                                                    Ch
#
——————————————————————————–
Eth2/1        —      eth  routed up      none                       1000(D) —
Eth2/2        —      eth  routed down    Administratively down      auto(D) —
Eth2/3        —      eth  routed down    Administratively down      auto(D) —
Eth2/4        —      eth  routed down    Administratively down      auto(D) —
Eth2/5        —      eth  routed down    Administratively down      auto(D) —
Eth2/6        —      eth  routed down    Administratively down      auto(D) —
Eth2/7        —      eth  routed down    Administratively down      auto(D) —
Eth2/8        —      eth  routed down    Administratively down      auto(D) —
Eth2/9        —      eth  routed down    Administratively down      auto(D) —

——————————————————————————-
Interface Secondary VLAN(Type)                    Status Reason
——————————————————————————-
nx7000#

————————————————————————————————————-

[1] http://forum.gns3.net/topic8069.html

[2] http://brezular.com/2013/01/07/how-to-connect-cisco-nx-os-emulator-titanium-5-1-2-installed-on-vmware-to-gns3/

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s