Perbedaan Router OSFPv3 vs IPv6 Router OSPF

Baru baca dokumen dari Ciscopress, ternyata:

versi/mode lama:

ipv6 router ospf 1

interface loopback0

ipv6 ospf 1 area 0

contoh:

R2#sh run int lo0
Building configuration…

Current configuration : 159 bytes
!
interface Loopback0
ip address 2.2.2.2 255.255.255.255
ip ospf network point-to-point
ip ospf 1 area 0
ipv6 address 2001::2/128
 ipv6 ospf 1 area 0
end

R2#
R2#sh ipv6 ospf nei

OSPFv3 Router with ID (2.2.2.2) (Process ID 1)

Neighbor ID     Pri   State           Dead Time   Interface ID    Interface
11.11.11.11       1   FULL/BDR        00:00:37    5               GigabitEthernet1/0
R2#

versi baru:

router ospfv3 1

router-id x.x.x.x

interface loopback0

ospfv3 1 ipv6 area 0

contoh:

R1#sh run int lo0
Building configuration…

Current configuration : 129 bytes
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
ip ospf 1 area 0
ipv6 address 2001::1/128
ospfv3 1 ipv6 area 0
end

R1#

R1#sho ospfv3 neighbor

OSPFv3 1 address-family ipv6 (router-id 1.1.1.1)

Neighbor ID     Pri   State           Dead Time   Interface ID    Interface
11.11.11.11       1   FULL/BDR        00:00:37    6               GigabitEthernet1/0
R1#

R1#show ipv6 route ospf
IPv6 Routing Table – default – 12 entries
Codes: C – Connected, L – Local, S – Static, U – Per-user Static route
B – BGP, R – RIP, H – NHRP, I1 – ISIS L1
I2 – ISIS L2, IA – ISIS interarea, IS – ISIS summary, D – EIGRP
EX – EIGRP external, ND – ND Default, NDp – ND Prefix, DCE – Destination
NDr – Redirect, O – OSPF Intra, OI – OSPF Inter, OE1 – OSPF ext 1
OE2 – OSPF ext 2, ON1 – OSPF NSSA ext 1, ON2 – OSPF NSSA ext 2, l – LISP
O   2001::2/128 [110/2]
via FE80::A00:27FF:FE12:1C06, GigabitEthernet1/0
O   2001::11/128 [110/1]
via FE80::A00:27FF:FE12:1C06, GigabitEthernet1/0
O   2001:10:2:11::/64 [110/2]
via FE80::A00:27FF:FE12:1C06, GigabitEthernet1/0
O   2001:10:4:11::/64 [110/2]
via FE80::A00:27FF:FE12:1C06, GigabitEthernet1/0
R1#

di router lainnya, XR1:

RP/0/0/CPU0:XR1#sho ospfv3 neighbor
Sat May  6 12:49:39.045 UTC

Neighbors for OSPFv3 1

Neighbor ID     Pri   State           Dead Time   Interface ID    Interface
1.1.1.1         1     FULL/DR         00:00:37    4               GigabitEthernet0/0/0/2
Neighbor is up for 02:40:21
2.2.2.2         1     FULL/DR         00:00:34    4               GigabitEthernet0/0/0/1
Neighbor is up for 01:36:06

Total neighbor count: 2
RP/0/0/CPU0:XR1#

RP/0/0/CPU0:XR1#sho route ipv6 ospf
Sat May  6 12:51:35.657 UTC

O    2001::1/128
[110/1] via fe80::c804:15ff:fe14:1c, 02:42:12, GigabitEthernet0/0/0/2
O    2001::2/128
[110/1] via fe80::c805:15ff:fe14:1c, 01:35:21, GigabitEthernet0/0/0/1
RP/0/0/CPU0:XR1#

di versi baru ini support satu database LSA mencover IPv4 dan IPv6. Namun mekanisem transportnya menggunakan Ipv6. Begitu kata ciscopress[1].

[1] http://www.ciscopress.com/articles/article.asp?p=2294214&seqNum=4

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s